[HIFLUX] High Pressure Relief Valve - Proportional Type 1000psi - 20000psi

Proportional type is a progressively opened as the system pressure increase. It is useful in the system which the pressure increase rapdly or in the high flow system due to vent flow is increased as much as system pressure is increased.


* FEATURES

- Pressure range : 1,000psi ~ 20,000psi
- Setting Pressure tolerance : ±8%
- Inlet port : H2009 (9/16")
- Orifice size : ø 6.3
- Outlet port : 1/2" NPT
- Standard Material : STS316
- O-ring material on piston : Viton
- Max operating temperature : 160℃
- possible to connect many other types with Adapter.
- Stable sealing is possible by using PEEK stem
- Supply with set pressure (Customer requirement) with sealing tag.

* SPECIFICATION

- As all sizes are for reference, they can be changed without any notification.
- Please contact us for details or send to online inquiry, we will give you respond as soon as possible.

* TABLE OF MATERIAL

* TECHNICAL FEATURES

WHERE

- To protect the equipment form the over pressure.
- In the system which control the overpressure by heat expansion.
- When the low drain rates is not the problem point in high pressure.
- When the system requires “bubble tight’ sealing.



WHERE NOT
 

- Pressure ~ below 1,000psi.
- If the back pressure occurs at the drain port.
- High corrosive fluids, liquid N2 or any other fluids that defect the valves.
- High temperature fluid that can damage the valve.

SET PRESSURE
 

- The pressure of inlet port effects set pressure
- Turn right to increase set pressure.
- Turn left to decrease set pressure.

* HIFLUX High Pressure Products

	High pressure needle valve		High pressure pipe needle valve
	High pressure check valve		High pressure ball valve
	High temperature valve		High pressure control valve
	Air operated valve		High pressure tube fitting
	High pressure tube		High pressure nipple
	Low pressure tube		High pressure gauge
	High pressure regulator		Back pressure regulator
	High pressure union adapter		General pressure regulator
	High pressure adapter		High pressure male adapter
	Tube support
	Safety Head		Rupture disc
	Tooling Set-Coning tool		Tooling Set-Reseating tool
	Tooling Set-Threading tool		Lok Type Fitting
	Lok Type Valve

* Ordering option


- As our products are divided into pressures of 15,000~150,000psi, body type and port size, you can use them according to the specifications which you want to use.
- Our products generally are produced with STS materials, but they can be manufactured with other materials on demand so that various fluids and gases can be used.
- Please inquire with us about special materials apart from the above-mentioned materials, such as STS316, HC-276, INC600, INC700, Ti and Ni.


* Homepage : http://www.hiflux.net
* SNS : https://www.facebook.com/hiflux.sns